For Hyundai, Kia, and Mitsubishi owners, a failing fuel pump can lead to frustrating breakdowns, poor engine performance, and safety risks. The ‌SP9002H Fuel Pump Assembly‌ is a precision-engineered, direct replacement for the OEM part ‌232060C020‌, designed to restore fuel delivery accuracy, pressure, and reliability. This guide covers its compatibility, key features, installation steps, and why choosing this OEM-grade component ensures long-term drivability and peace of mind.

Why the SP9002H Fuel Pump Matters‌

The fuel pump is the heart of your vehicle’s fuel system, responsible for:

Consistent Fuel Pressure‌: Delivers optimal pressure (40–65 PSI) to the engine.
Precise Fuel Volume‌: Matches ECU demands for acceleration and load.
Durability‌: Resists ethanol-blended fuels, heat, and contaminants.
Safety‌: Prevents engine stalling or lean combustion conditions.

Using inferior aftermarket pumps risks:

Engine Misfires‌: Low pressure causes uneven fuel delivery (Codes ‌P0087‌ or ‌P0230‌).
Premature Failure‌: Cheap materials degrade, leading to sudden pump failure.
Fuel Leaks‌: Poorly sealed assemblies risk fire hazards.
Voided Warranty‌: Non-OEM parts may invalidate coverage.
Compatibility: Vehicles & Engines‌

The ‌SP9002H‌ directly replaces ‌232060C020‌ and fits:

Hyundai‌: Sonata (2015–2024), Santa Fe (2016–2024), Tucson (2016–2024) – 2.4L GDI, 1.6L Turbo engines.
Kia‌: Sorento (2015–2024), Sportage (2016–2024) – 2.0L T-GDI, 2.2L Diesel.
Mitsubishi‌: Outlander (2014–2024), Eclipse Cross (2018–2024) – 2.4L MIVEC.

Note‌: Confirm fitment via VIN or consult dealership databases.

Key Features of the SP9002H Fuel Pump‌
OEM Specifications‌: Matches flow rates (150–200 L/hour) and pressure tolerances of 232060C020.
High-Quality Components‌:
Brushed DC Motor‌: Resists wear from ethanol and carbon buildup.
PTFE Seals‌: Withstand fuel additives and temperature swings (-30°C to 120°C).
Stainless Steel Strainer‌: Filters contaminants without clogging.
Plug-and-Play Design‌: Integrates with factory wiring, fuel lines, and mounting brackets.
Noise Reduction‌: Optimized impeller design minimizes humming during operation.
Symptoms of a Failing Fuel Pump‌
Hard Starting‌: Extended cranking or failure to start (especially when hot).
Engine Sputtering‌: Loss of power at high speeds or under load.
Fuel Odor‌: Leaks from cracked seals or loose connections.
Check Engine Light‌: Codes like ‌P0171‌ (System Too Lean) or ‌P0193‌ (Fuel Rail Pressure Sensor).
Whining Noise‌: Loud humming from the rear seats (fuel tank area).

Test fuel pressure with a gauge to confirm pump health.

Installation Guide‌
Safety Precautions‌:
Disconnect the battery and relieve fuel system pressure via the Schrader valve.
Work in a ventilated area to avoid fuel vapor ignition.
Access the Fuel Pump‌:
Remove rear seat cushions and unbolt the fuel tank access panel.
Disconnect the electrical connector, fuel lines, and vent hoses.
Replace the Assembly‌:
Carefully remove the old pump (232060C020) and transfer the fuel level sensor to the SP9002H if required.
Align the new SP9002H assembly with the tank flange and secure the lock ring.
Reconnect hoses and wiring, ensuring no kinks in fuel lines.
Post-Installation‌:
Reconnect the battery and prime the system by turning the ignition to “ON” (do not start) 3–4 times.
Check for leaks and test-drive to verify smooth acceleration.

Torque Specs‌:

Fuel pump lock ring: ‌35–45 Nm‌
Fuel line connections: ‌20–25 Nm‌
Why Avoid Aftermarket Fuel Pumps?‌

Cheap alternatives often:

Overheat‌: Substandard motors fail under continuous load.
Deliver Inconsistent Pressure‌: Causes hesitation or ECU errors.
Leak Fuel‌: Poorly molded seals degrade quickly.
Void Warranties‌: Hyundai/Kia/Mitsubishi deny claims for non-genuine parts.

The ‌SP9002H‌ guarantees:

OEM Performance‌: Matches factory durability and efficiency.
2-Year Warranty‌: Backed by certified suppliers.
Direct Fitment‌: No modifications or adapters needed.
Where to Buy the SP9002H Fuel Pump‌

Purchase from authorized retailers like ‌Hyundai Parts Pro‌, ‌Kia Genuine Parts‌, or ‌Mitsubishi OEM Parts Hub‌. Verify authenticity via:

Laser-etched part numbers.
Anti-counterfeit hologram labels.
Sealed OEM packaging with manufacturer logos.
Conclusion‌

The ‌SP9002H Fuel Pump Assembly‌ is the definitive solution for replacing the OEM ‌232060C020‌ in Hyundai, Kia, and Mitsubishi vehicles. Engineered to meet strict OEM standards, it ensures reliable fuel delivery, reduced breakdown risks, and seamless integration with your vehicle’s ECU. Avoid costly repairs and downtime by choosing this trusted direct replacement.

Keywords‌: SP9002H Fuel Pump, 232060C020 Replacement, OEM Fuel Pump Assembly

FAQ‌
Q: How long does the SP9002H fuel pump last?‌
A: Up to ‌120,000–150,000 miles‌ with proper maintenance.

Q: Can I install the pump without draining the fuel tank?‌
A: Yes, but ensure the tank is below ¼ capacity to avoid spills.

Q: Does the SP9002H include a new fuel filter?‌
A: Yes. The assembly integrates a replaceable strainer.

Q: Will this pump work with ethanol-blended fuels?‌
A: Yes. PTFE seals resist E10, E15, and E85 fuels.

Q: What’s the average replacement cost?‌
A: Part: ‌
180
–
180–300‌; labor: ‌
150
–
150–250‌ (1–2 hours).

For professional installation, visit a certified dealership or mechanic.

This SEO-optimized article combines technical specifications, troubleshooting tips, and keyword targeting to help vehicle owners and technicians identify, purchase, and install the ‌SP9002H Fuel Pump Assembly‌ while boosting search rankings for “SP9002H” and “232060C020 replacement.”