For vehicle owners and technicians, a failing fuel pump can lead to engine stalling, poor acceleration, and costly breakdowns. The ‌2520817 Fuel Pump Assembly‌ is a high-performance, direct replacement for the OEM part ‌2520532‌, engineered to restore precise fuel delivery, pressure, and durability in compatible vehicles. This guide covers its compatibility, key upgrades, installation steps, and why choosing this OEM-grade component ensures long-term reliability and compliance with emission standards.

Why the 2520817 Fuel Pump Matters‌

The fuel pump is critical for:

Optimal Fuel Pressure‌: Maintains 55–65 PSI for efficient combustion.
Consistent Fuel Flow‌: Matches ECU demands across RPM ranges.
Ethanol Resistance‌: Compatible with E10, E15, and E85 fuels.
Safety‌: Prevents lean conditions or sudden engine shutdowns.

Using inferior replacements risks:

Engine Codes‌: P0087 (Low Fuel Pressure) or P0230 (Fuel Pump Circuit Issues).
Premature Failure‌: Cheap materials degrade under heat and vibration.
Fuel Leaks‌: Poorly sealed assemblies create fire hazards.
Warranty Issues‌: Non-OEM parts may void manufacturer coverage.
Compatibility: Vehicles & Engines‌

The ‌2520817‌ directly replaces ‌2520532‌ and fits:

Ford‌: Escape (2017–2023), Fusion (2016–2024) – 1.5L EcoBoost, 2.0L Ti-VCT.
GM Vehicles‌: Chevrolet Equinox (2018–2024), GMC Terrain (2018–2024) – 1.5L/2.0L Turbo.
Nissan‌: Rogue (2017–2024), Altima (2016–2024) – 2.5L QR25DE.
Engines‌: Gasoline direct injection (GDI) and port-injected engines.

Note‌: Confirm fitment via VIN or consult OEM technical service bulletins.

Key Upgrades Over 2520532‌
Enhanced Motor Design‌: Brushed DC motor with carbon commutators for 20% longer lifespan.
Robust Strainer‌: Multi-layer nylon mesh resists clogging from debris.
Improved Seals‌: Viton-coated O-rings withstand temperature extremes (-30°C to 130°C).
Noise Reduction‌: Redesigned impeller minimizes operational humming.
Plug-and-Play Compatibility‌: Matches factory electrical connectors and mounting points.
Symptoms of a Failing Fuel Pump‌
Engine Hesitation‌: Stumbles during acceleration or uphill driving.
Long Cranking‌: Takes 5+ seconds to start, especially when hot.
Sudden Power Loss‌: Engine dies at idle or low speeds.
Whining Noise‌: Loud hum from the fuel tank area.
Check Engine Light‌: Codes related to fuel pressure or pump circuit.

Test fuel pressure with a gauge (spec: 55–65 PSI at idle) to confirm pump health.

Installation Guide‌
Safety Precautions‌:
Disconnect the battery and relieve fuel system pressure via the Schrader valve.
Avoid open flames or sparks near the fuel tank.
Access the Fuel Pump‌:
Remove rear seat cushions or trunk lining to access the fuel tank module.
Disconnect wiring, fuel lines, and vent hoses.
Replace the Assembly‌:
Remove the lock ring securing the old pump (‌2520532‌) and lift out the assembly.
Transfer the fuel level sensor (if applicable) to the new ‌2520817‌ pump.
Align the new assembly with the tank flange and secure the lock ring (torque: ‌30–40 Nm‌).
Post-Installation Checks‌:
Reconnect the battery and prime the system by cycling the ignition 3–4 times.
Inspect for leaks and test-drive to verify smooth operation.
Why Choose 2520817 Over Aftermarket Pumps?‌
OEM Specifications‌: Matches flow rate (170–200 L/hr) and pressure tolerances.
Durability‌: Rated for 120,000+ miles under normal driving conditions.
Warranty‌: 2-year coverage from authorized sellers.
Guaranteed Fitment‌: No modifications or adapters needed.

Cheap alternatives often fail due to:

Overheating Motors‌: Inadequate cooling in stop-and-go traffic.
Inconsistent Pressure‌: Causes ECU errors and misfires.
Leaking Seals‌: Swell or crack when exposed to ethanol blends.
Where to Buy the 2520817 Fuel Pump‌

Purchase from trusted suppliers like ‌Ford Parts Direct‌, ‌GM Genuine Parts‌, or certified retailers. Verify authenticity via:

OEM-branded packaging with holographic labels.
Laser-etched part numbers on the pump housing.
Warranty registration cards included.
Conclusion‌

The ‌2520817 Fuel Pump Assembly‌ is the definitive replacement for the discontinued ‌2520532‌, offering enhanced durability, ethanol compatibility, and noise reduction. Designed to meet strict OEM standards, it ensures reliable fuel delivery in Ford, GM, and Nissan vehicles while preventing costly breakdowns and ECU issues. Invest in this direct-fit upgrade for peace of mind and optimal engine performance.

Keywords‌: 2520817 Fuel Pump, 2520532 Replacement, OEM Fuel Pump Assembly

FAQ‌
Q: How long does installation take?‌
A: 1–2 hours for experienced technicians; DIY may take 3–4 hours.

Q: Can I use 2520817 in diesel engines?‌
A: No. This pump is designed for gasoline engines only.

Q: Does it include a new fuel filter?‌
A: Yes. The assembly integrates a replaceable in-tank strainer.

Q: What’s the cost difference vs. aftermarket?‌
A: OEM-grade pumps cost ‌
220
–
220–350‌ vs. ‌
90
–
90–150‌ for low-quality alternatives.

Q: Will this pump resolve P0087 codes?‌
A: Yes, if the original pump (2520532) was the root cause.

For professional assistance, consult an ASE-certified mechanic.

This SEO-optimized article combines technical details, compatibility data, and keyword targeting to help users identify, purchase, and install the ‌2520817 Fuel Pump Assembly‌ while improving search rankings for “2520817” and “2520532 replacement.”